Sand filter with pump, 400W, 11000 l/h

This sand filter pump is designed to keep pool water clean and free of debris.

The sand filter can filter 11,000 liters per hour and has a durable, anti-corrosive filter tank that is resistant to the effects of acidic chlorinated pool water. It also has a multi-layer valve for easy operation and an easy-to-read pressure gauge. Thanks to the top flange clamp design, it rotates 360 degrees for hassle-free installation. For safe installation, this set has a fixed base.

Thanks to the reinforced plastic housing, this pool filter pump is weatherproof and durable. It can be used in all above ground pools with a 2.5cm connection.

Note: It can be connected to both 32mm diameter and 38mm diameter hoses. This product is GS certified and therefore will meet all the highest safety standards.

• Dimensions: 298 x 458 x 621 mm (W x D x H)
• Power supply: 220-240V~, 50Hz
• Power: 400 W
• Connection hole diameter: 2.5 cm
• Filter diameter: 30 cm (12'')
• Maximum lifting height: 8.5m
• Maximum pump capacity: 11000 l/h
• Maximum working pressure: 3.5 bar
• Suitable water temperature: 0-45°C
• Flow rate: 31 GPM/7 m³/h
• Filter required 19 kg of sand (not included)
• GS certified
• IP level: IPX5
• Suitable for both 32 mm and 38 mm diameter hoses.
• Both silica sand and filter balls are suitable for this filter pump system.

This device is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or instructed in the use of the device by a person responsible for their safety. This product is not a toy. Do not allow children to play with the device.