Automatic markup with LED / wind sensor, creamy, 600x300cm

With this extraction of the awning in your outdoor spaces, create a pleasant and cool place!

This outdoor awning is characterized by rust -resistant powder -coated aluminum frame, which ensures that it is easy and durable. The fabric of the yard awning is made of high density PU coating polyester, so it is resistant to UV rays and water. In addition, its angle and height can be adjusted according to your porridge. You can usually open and pull out the automatic removal of the remote control. You can also manage the awning with a long handle. It also has a wind sensor that will automatically unfold the awnings on windy days. In addition, LED bulbs provide energy -saving lighting during the night.

• Color: Cream
• Frame Color: White
• Material: Powder Covered Aluminum, 100% PU Covering Polyester Fabric
• height)
• Voltage: 230 V ~, 0.95 A; 50/60 Hz
• Power: 226 W
• Turning moment: 40 nm
• speed: 13 rpm/min.
• Hliped voltage: 12 v
• You need to assemble: yes

Those without sufficient experience and knowledge if they are supervised or have been given instructions related to the safe use of the device and the dangers may be discussed. Children should not play with the device. Cleaning and user care should not be carried out unattended by children. If the electricity supply cable is damaged, it must be replaced by the manufacturer, the service agent or the similar person to avoid the danger. Warning: Important safety instructions. It is important to follow these instructions to ensure people's safety. Save these instructions. Warning: Important safety instructions. Follow all instructions as poor installation can cause serious injuries or even death. Don't let the kids play with the control device. Keep the remote control out of the reach of the children. Do not use the awnings if you do maintenance work like window cleaning nearby. Moving drive parts must be installed above 2.5 m above the floor or other surface from which they can be achieved. Before installing the driving part, remove any unnecessary ropes and turn off any unnecessary equipment. The switching of the switch switch must be in a well -visible place, but remotely moving parts. It must be mounted at a height of at least 1.5 m. When the spring unfolds, the spring is extremely tense. Do not remove this rope before the assembly will be finished and all bolts will be tightened and the item will be attached to the wall! Warning! Be careful when loosening handles - they are tense! Sudden release of a roof folding handle can cause injuries. Warning: The operator's instructions must be read before using the item. Warning: The use of a roof in cold weather can damage it. External use of buildings and work in other constructions. Dangerous unprotected moving parts must be installed above 2.5 m above the floor or other surfaces, ensuring that they will not be accessible. GPSR